60–130 kg·cm Servo Motors

Servo motors from 60 to 130 kg·cm (5.9–12.7 N·m) are the workhorse band for collaborative robot joints, quadruped legs and medium AGV axes. At this torque level a servo usually replaces a stepper plus gearbox, so backlash, encoder resolution and heat become the deciding factors rather than price alone.

What fits in this torque range

  • Collaborative robot arm joints (3–10 kg payload class)
  • Quadruped knee and hip actuators
  • Medium AGV drive and steering
  • Exoskeleton and rehabilitation devices

Torque reference

60 kg·cm 5.9 N·m
100 kg·cm 9.8 N·m
130 kg·cm 12.7 N·m
Typical payload 3–8 kg on a 10 cm arm

Rated torque vs stall torque

A 100 kg·cm servo usually quotes stall torque at rated voltage, measured for a few seconds. Continuous output is typically 30–50% of that. If your axis holds a load for minutes at a time, size from the continuous figure and check the case temperature rise, not just the headline number.

FAQ

Do I need a holding brake at this torque?

If the axis must stay put when power is removed — a vertical lift or a robot shoulder — yes. Otherwise the servo will back-drive under load.

What supply voltage should I use?

24 V is common for 60–80 kg·cm units; 48 V gives more speed and lower current for the 100–130 kg·cm range. Match the driver rating, not just the motor label.

Related: 20–60 kg·cm servos · 130–400 kg·cm servos

Showing 1–12 of 14 results

Scroll to Top