20–60 kg·cm Servo Motors

Servo motors between 20 and 60 kg·cm (2.0–5.9 N·m) cover the middle of light robotics: desktop arms, small AGV steering, camera payloads and educational humanoids. This is the most common band for a first multi-axis machine, because it is strong enough to lift a real payload and small enough to run from a 12–24 V supply.

What fits in this torque range

  • 4 to 6 axis desktop robot arms
  • Small AGV and AMR steering axes
  • Pan-tilt heads carrying 1–3 kg cameras or sensors
  • Educational humanoids and exoskeleton prototypes

Torque reference

20 kg·cm 2.0 N·m
40 kg·cm 3.9 N·m
60 kg·cm 5.9 N·m
Typical payload 1–3 kg on a 10 cm arm

Choosing inside this range

Two numbers separate a good 40 kg·cm servo from a bad one: backlash and continuous versus peak torque. A geared servo rated at 60 kg·cm peak may only hold 30 kg·cm continuously without overheating. Ask for both figures, and for the duty cycle they assume.

FAQ

Should I pick 30 kg·cm or 60 kg·cm?

Compute the static load first (payload × arm length), then add 50% for dynamics and safety. If the result lands between two sizes, take the larger one — torque margin buys acceleration and thermal headroom.

Does gear ratio affect precision?

Yes. Higher reduction multiplies torque but adds backlash. For positioning work below 0.5°, ask for the backlash figure in arc-minutes before choosing a high-ratio gearbox.

Related: ≤20 kg·cm servos · 60–130 kg·cm servos

Showing 1–12 of 39 results

Scroll to Top