60–130 kg·cm Servo Motors
Servo motors from 60 to 130 kg·cm (5.9–12.7 N·m) are the workhorse band for collaborative robot joints, quadruped legs and medium AGV axes. At this torque level a servo usually replaces a stepper plus gearbox, so backlash, encoder resolution and heat become the deciding factors rather than price alone.
What fits in this torque range
- Collaborative robot arm joints (3–10 kg payload class)
- Quadruped knee and hip actuators
- Medium AGV drive and steering
- Exoskeleton and rehabilitation devices
Torque reference
| 60 kg·cm | 5.9 N·m |
| 100 kg·cm | 9.8 N·m |
| 130 kg·cm | 12.7 N·m |
| Typical payload | 3–8 kg on a 10 cm arm |
Rated torque vs stall torque
A 100 kg·cm servo usually quotes stall torque at rated voltage, measured for a few seconds. Continuous output is typically 30–50% of that. If your axis holds a load for minutes at a time, size from the continuous figure and check the case temperature rise, not just the headline number.
FAQ
Do I need a holding brake at this torque?
If the axis must stay put when power is removed — a vertical lift or a robot shoulder — yes. Otherwise the servo will back-drive under load.
What supply voltage should I use?
24 V is common for 60–80 kg·cm units; 48 V gives more speed and lower current for the 100–130 kg·cm range. Match the driver rating, not just the motor label.
Related: 20–60 kg·cm servos · 130–400 kg·cm servos
Showing 1–12 of 14 results
-
60–130 kg·cm Servo Motors
Industrial Brushless Servo RS9080F 100kg (9.8 N·m) 30V 290g RS485
Read more -
60–130 kg·cm Servo Motors
Heavy Duty Brushless Servo BLS8185HV 85kg (8.3 N·m) 16.8V 92g PWM
Read more -
60–130 kg·cm Servo Motors
Heavy Duty Brushless Servo BLS8185DC 85kg (8.3 N·m) 8.4V 92g CAN
Read more -
60–130 kg·cm Servo Motors
Heavy Duty Brushless Servo BLS8185HVC 85kg (8.3 N·m) 16.8V 92g CAN
Read more -
60–130 kg·cm Servo Motors
Heavy Duty Brushless Servo RS8185D 85kg (8.3 N·m) 8.4V 92g RS485
Read more -
60–130 kg·cm Servo Motors
Heavy Duty Brushless Servo RS8185HV 85kg (8.3 N·m) 16.8V 92g RS485
Read more -
60–130 kg·cm Servo Motors
High Torque Brushless Servo BLS8175D 75kg (7.4 N·m) 8.4V 88g PWM
Read more -
60–130 kg·cm Servo Motors
High Torque Brushless Servo BLS8175DC 75kg (7.4 N·m) 8.4V 88g CAN
Read more -
60–130 kg·cm Servo Motors
High Torque Brushless Servo RS8175D 75kg (7.4 N·m) 8.4V 88g RS-485
Read more











