Can XQ-POWER Servos Be Configured for Communication Timeout Protection?
Yes—communication timeout protection can be an important configuration topic for digital servos, especially models controlled through RS485, CAN, or another […]
Servo Communication & Control
RS485, CAN bus, TTL serial, MODBUS-RTU and PWM: wiring, protocols, multi-node networks, EMI and closed-loop control for servo systems.
Servo Communication & Control
PWM servos support refresh rates from 50-333Hz. How do different frequencies affect performance? What Hz is suitable?
The XQ-POWER digital servo supports PWM signal frequencies from 50-333Hz. Higher frequencies result in faster control signal updates and more
Servo Communication & Control
Industrial Servo PID Tuning — Stop Oscillation Fast
Industrial Servo PID Tuning — Stop Oscillation Fast Industrial servo PID tuning scares off a lot of mechanical engineers, but
Servo Communication & Control
Dual Servo Master-Slave — Syncing Two Actuators Under Load
Dual Servo Master-Slave — Syncing Two Actuators Under Load A dual servo master slave setup sounds simple enough: two servos,
Servo Communication & Control
Closed Loop Servo Control: Why Feedback Changes Everything
Closed Loop Servo Control: The Difference Between “Moved” and “Arrived” Closed loop servo control is the difference between guessing and
Servo Communication & Control
RS485 Daisy Chain Wiring Guide for Multi-Servo Arrays
RS485 Daisy Chain Wiring is the best way to manage complex multi-servo arrays without creating a mess of tangled cables.
Servo Communication & Control
Serial Bus Servo vs PWM for AGV Steering Systems
Serial Bus Servo technology is quickly replacing traditional PWM signals in modern AGV steering designs. A lead engineer from a
Servo Communication & Control
CAN Bus Servo: One Wire, No Collisions
A CAN bus servo isn’t just a servo with a different connector. It solves a problem that gets worse the
Servo Communication & Control
RS485 vs CAN Bus Servo Communication: When Polling Isn’t Enough
RS485 vs CAN Bus Servo Communication: Pick the Wrong Protocol and Your AGV Fleet Pays for It RS485 and CAN
Servo Communication & Control
EMI resistant industrial servo: Eliminating Signal Jitter in Factories
An EMI resistant industrial servo is the only way to ensure system stability in “noisy” factory environments where high-power motors and VFDs