The XQ-POWER digital servo supports PWM signal frequencies from 50-333Hz. Higher frequencies result in faster control signal updates and more sensitive servo responses.
However, please note: ① The signal frequency output by the flight controller/receiver must be compatible with the servo. Frequency exceeding 333Hz may cause the servo to be unrecognizable or malfunction; ② Higher frequencies increase the internal processing load of the servo, slightly increasing heat generation; ③ Standard receivers typically output 50Hz (analog servo compatible mode), while high-speed flight controllers can be adjusted to 250-333Hz. It is recommended to consult the equipment manual and set the frequency within the range compatible with the servo. 200-333Hz usually provides the best response.